Single Carving Chisels

Our Carving Chisels are hand forged from S7 and receive a multi part differential hardening process that makes them not only strong but incredibly safe for hot and cold workloads.

#1 Small Round Eye Punch Carving Chisel

3/16” eye

Forged centre

For small horses, nail faces & mice

#1 Small Round Eye Punch Carving Chisel

$ 30.00 USD

The small eye punch is forged to create a roughly 3/16” eye. The centers of this eye punch are forged, not drilled, so that the cone shaped indentation in the center of the eye punch can aid in the effect of creating a pupil. The small eye punch is used for small horse, nail faces, mice and various other carvings.

#10 Large Bucktooth Butcher Carving Chisel

For big square teeth

Good for biting in

Scaled up version

#10 Large Bucktooth Butcher Carving Chisel

$ 30.00 USD

The large bucktooth butcher is roughly 1/2” across and is a scaled up version of the small bucktooth butcher. Good for biting in and then pushing material along. Named for its use in carving in and pushing out big square teeth.

#11 Small Scoop Carving Chisel

Draw scrolls & circles

Troughing action

For gills or scales

#11 Small Scoop Carving Chisel

$ 30.00 USD

The small scoop chisel is a butcher ground blade forged around a roughly 3/4” radius. It can be used in chasing to draw scrolls and circles. For carving, it can be used on one side for a troughing action or flipped over to the other side to cut in and push up a curve, such as the gills or scale on a fish or dragon, or to give the representation of folds in long flowing hair.

#12 Large Scoop Carving Chisel

Draw scrolls and circles

Troughing action

For folds of hair

#12 Large Scoop Carving Chisel

$ 30.00 USD

The large scoop chisel is a butcher ground blade forged around a roughly 1” radius. It can be used in chasing to draw scrolls and circles. For carving, it can be used on one side for a troughing action or flipped over to the other side to cut in and push up a curve, such as the gills or scale on a fish or dragon, or to give the representation of folds in long flowing hair.

#13 Small Ball Fuller Carving Chisel

Aggressive

Makes a nice dimple

For nostrils and stippling

#13 Small Ball Fuller Carving Chisel

$ 30.00 USD

The small ball fuller is based on a 3/16” sphere that tapers out into a cone. It is aggressive enough to start an indentation on a steep curve. As well as making a nice dimple, it can be used to be the start for a larger ball fuller. Normally used for nostrils and stippling.

#14 Medium Ball Fuller Carving Chisel

Hand-forged

Suitable for contouring

Perfect for eye sockets & large nostrils

#14 Medium Ball Fuller Carving Chisel

$ 30.00 USD

The medium ball fuller is based on a 1/4” sphere that tapers out into a cone. It is perfect for eye sockets, large nostrils and some contouring.

#15 Large Ball Fuller Carving Chisel

Strong

For larger carving

Ideal for contouring for smooth surfaces

#15 Large Ball Fuller Carving Chisel

$ 30.00 USD

The large ball fuller is based on a 3/8” sphere that tapers out into a cone. Its uses include larger carving and contouring of surfaces for smooth transition.

#16 Whisker Tool Carving Chisel

Hand-forged

For texturing

Can follow contours & curves

#16 Whisker Tool Carving Chisel

$ 30.00 USD

This whisker tool is used mainly for texturing. It makes the most wonderful whisker texture that can follow contours and curves.

#17 Tear Drop Punch Carving Chisel

Effective

For complex curving shapes

Essential for faces

#17 Tear Drop Punch Carving Chisel

$ 30.00 USD

The teardrop punch is an all around useful tool to create complex curving shapes, a must have for faces. The large side of the teardrop is nearly a 1/2” sphere tapering down to a fine tip on the other end.

#18 Small Angled Square Set Hammer Carving Chisel

For impression work & chasing

To create value

Produce an illusion of depth

#18 Small Angled Square Set Hammer Carving Chisel

$ 30.00 USD

The small angled square set hammer is roughly 3/8” and used mostly in impression work and chasing for driving down one side of a cut line to create value or the illusion of depth.

#19 Large Angled Square Set Hammer Carving Chisel

For impression work & chasing

Create value

Produce an illusion of depth

#19 Large Angled Square Set Hammer Carving Chisel

$ 30.00 USD

The large angled square set hammer is roughly 1/2” and used mostly in impression work and chasing for driving down one side of a cut line to create value or the illusion of depth.

#2 Medium Round Eye Punch Carving Chisel

Drilled center of the eye

Can create vivid pupil

For animal heads & faces

#2 Medium Round Eye Punch Carving Chisel

$ 30.00 USD

The medium eye punch is the most commonly used and creates a roughly 1⁄4” eye. Like the small eye punch, the center of the eye is forged, not drilled, allowing for the creation of a pupil. Furthermore, the small eye punch can be used on an eyeball made by the medium eye punch to make a very vivid pupil. The medium eye punch is used for many varieties of animal head, faces such as wizard head, and other carvings.

#20 Small Fuller Set Hammer Carving Chisel

Make a line in steel

Variety of carving & chasing

For mule's ears & owl's eyes

#20 Small Fuller Set Hammer Carving Chisel

$ 30.00 USD

The small fuller is based around a roughly 3/16” radius allowing you to make a line in a piece of steel without cutting it. Fullers are used in a wide variety of carving and chasing work from the hollows of a mules ears to the texture around an owl’s eyes.

#21 Large Fuller Set Hammer Carving Chisel

Make a line in steel

Variety of carving & chasing

For mule's ears & owl's eyes

#21 Large Fuller Set Hammer Carving Chisel

$ 30.00 USD

The large fuller is based around a roughly 1/4” radius allowing you to make a line in a piece of steel without cutting it. Fullers are used in a wide variety of carving and chasing work from the hollows of a mules ears to the texture around an owl’s eyes.

#22 Center Punch Carving Chisel

Finest

Low profile

High visibility & flared grip

#22 Center Punch Carving Chisel

$ 30.00 USD

This center punch is by far the best center punch you can buy! With its low profile for high visibility and flared grip, you can use it to make marks on a precision layout and then turn around and drive it deep into hot steel.

#23 Offset Center Punch Carving Chisel

Hand-forged

Create a swell

Start an indentation

#23 Offset Center Punch Carving Chisel

$ 30.00 USD

The offset center punch mark is perfect for starting an indentation in a piece of steel straight on and then dropping the angle of the chisel and driving along the surface of that piece of steel to create a swell as it plows though.

#24 The Engraver Carving Chisel

Rugged forging

Hybrid of palm & tap engravers

For fine detail in engraving & chasing

#24 The Engraver Carving Chisel

$ 30.00 USD

The engraver in this set is a hybrid of a palm engraver and a tap engraver. Forged in the same rugged manner as the rest of this set, this tool is capable of breathtakingly fine detail in engraving and chasing.

#3 Large Round Eye Punch Carving Chisel

Useful

Create eye of a flower

Tight scoop

#3 Large Round Eye Punch Carving Chisel

$ 30.00 USD

The large round eye punch is a very handy tool. While a 3/8” eye is often too large for most hand-carved faces unless scaled up, it works very well to create many good elements such as the eye of a flower, the laid back ears of a mouse, and can even be used as a tight scoop.

#4 Small Duck Eye Punch Carving Chisel

Teardrop punch

Ideal for a duck's eye

Useful for frogs & small snakes

#4 Small Duck Eye Punch Carving Chisel

$ 30.00 USD

The small duck eye is a teardrop punch that will leave a small raised center to represent the duck eye while the teardrop depression acts as the shading around the duck’s eye, killing two birds with one stone. It is normally used on ducks made of 1/2” and 5/8”. It is also useful for some frogs and small snakes.

#5 Large Duck Eye Punch Carving Chisel

For impression work

Ideal for a big duck's eye

Good for petals and leaves

#5 Large Duck Eye Punch Carving Chisel

$ 30.00 USD

As ducks tend to be a little bit on the goofy side anyway, you can never put too big of an eye on a duck. This punch also makes for good petals and leaves for chase pieces and on impression work.

#6 Wolf Eye Punch Carving Chisel

Oval shaped with diamond eye

Create aggressive eyes

For wolves, birds, snakes & horses

#6 Wolf Eye Punch Carving Chisel

$ 30.00 USD

Wolf eye punches are oval-shaped with diamonds as the eye or as the pupil. This provides a very aggressive looking eye that is perfect not only for wolves but also predatory birds, snakes and even very serious horses.

#7 Fast Cut Carving Chisel

Strength of a crowbar

Cutting edge of a razor blade

For cuttings in ears & long flowing whiskers

#7 Fast Cut Carving Chisel

$ 30.00 USD

Whether you’re cutting off a wire thin tendril or carving in a deep curving line, the fast cut chisel gives you the strength of a crowbar with the cutting edge of a razor blade. Used for cutting in ears, carving out long flowing whiskers, and even splitting down bar stock; the fast cut chisel is a must have from our carving set.

#8 Straight Carving Chisel

Cut off a thin slice

Sharp corners

For crisp lines & typed letters

#8 Straight Carving Chisel

$ 30.00 USD

The straight chisel can cut off a thin slice like the fast cut; its sharp corners give it the ability to put a good hard ending on a line. The straight chisel is used heavily where crisp lines are needed in carving or in the chasing of typed letters and numbers.

#9 Small Bucktooth Butcher Carving Chisel

Blunt chisel with curved blade

Ideal to bite in & push material along

For big teeth

#9 Small Bucktooth Butcher Carving Chisel

$ 30.00 USD

The small bucktooth butcher, roughly 3/8” across, is a blunt chisel with a slightly curved blade. Good for biting in and then pushing material along. Named for its use in carving in and pushing out big square teeth.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Copyright ©2021 Big Blu Hammer.