NEW Big BLU Model QC-155 with Quick Change die system.
The Big Blu's heavy all steel frame is designed so that it can be filled with sand to deaden noise and increase installed mass.
|
 |
The BIG BLU is a modern forging hammer for artist blacksmiths and metalworkers.
Its unique deep throat permits a wide range of work including repousse' on large panels.
NEW! Big BLU Quick Change interchangeable die system.
Order with your choice of standard
dies.
Discontinued Model
Made in USA
|
Specifications:
- Big BLU Quick Change Die System
- 155 pound (70 kg) Ram, 800 pound (363 kg) anvil
- 5 : 1 Anvil/ram ratio
- 1.75" x 3" x 5" (44.5 x 76.2 x 127 mm) Dies
- 3.25" (82.6 mm) bore HD cylinder with double wear bands.
- Taller 9" (2413 mm) Adjustable Stroke. Alows use of hand held tooling.
-
Infinite control of 0-225 strokes per minute coupled with a soft touch to massive blows is achieved by use of foot petal.
- Over 1000 pounds static clamping pressure (standard on QC-155).
- OSHA Treadle Guard.
- 95" ( mm) high, 36" x 20" (914 x 508 mm) base.
- 1700 pound (770 kg) total weight.
|
|
|
The Original Big BLU QC™
Made in USA
Copied but never equaled.
|
|
|
Copyright © 2003 BigBLU Hammer Mfg. Co., All rights reserved
|
 |
|
|
